Blizzard Lighting SnowBlind High-power 1W Cool White LED Blinder

The SnowBlind LED Blinder is fitted with 18 high-power 1W cool white LEDs, it's impressively bright. The SnowBlind features full range brightness/intensity adjustment, rate of strobe (speed), and internal microphone sensitivity that are fully controllable by just 3 channels of DMX, or by its easy to use 4-button LED control panel menu. Sound sensitivity can also be manually adjusted by the sensitivity adjustment knob that's located on the rear of the unit.

You can also take full advantage of Blizzard’s wiCICLE® wireless DMX system without the need for external power thanks to the wiCICLE enabled DMX jacks! An innovative design provides power to the system directly from the fixture’s DMX jack, meaning even fewer cords and less setup time. You can also use the SnowBlind in standalone mode, or link two or more together to run in Master/Slave mode to make a brilliant array of strobe fixtures, while each unit consuming only a tiny 25W of power!

All theses goodies are packed into an attractive, light-weight, black aluminum housing with single mounting bracket and dual locking knobs for easy installation. The SnowBlind is simply an astonishingly bright, full featured white light LED strobe fixture that's ready-to-go straight out of the box!

Features
Powered by 18x 1-watt white LED’s
Variable electronic strobe
Variable electronic dimmer
Controlled via 3-channel DMX and master/slave
Sound active mode in standalone and DMX modes
Microphone sensitivity adjustment in standalone and DMX modes
4-button easy to use LED control panel menu
Aluminum mounting bracket w/ locking knobs
Able to directly power the wiCICLE® wireless system via DMX

Light Source
18x 1-Watt Cool White LED’s, 100,000 hours.
20fps max strobe rate

Power
Operating Voltage: AC100V/240V 50/60Hz
Power Consumption: 25W

Optical
Beam Angle: 15 degrees
Operating Temperature
Max. Operating Temp.: 104 degrees F (40 degrees C) ambient

Control
Protocol: USITT DMX-512
DMX Channels: 3 Channel
Input: 3-pin XLR Male
Output: 3-pin XLR Female
Operating Modes: Sound Active, Master/Slave, DMX

Dimensions
Length: 12.59 inches (32 cm)
Width: 5.51 inches (14 cm)
Height: 3.54 inches (9 cm)
Weight: 3.52 lbs (1.6 kg)

Warranty
2-year limited warranty, does not cover malfunction caused by damage to LED’s