Antari DarkFX 1020 Strip UV Blacklight LED Bar Light

The Antari DarkFX Strip 1020 is an efficient high output low power consumption UV LED bar that delivers a peak wavelength of 365nm and radiant flux output of 9000+mW at full intensity with minimum visible light. This ensures all UV reactive materials, art, amusement park displays, and signage reflects perfectly with stunning bright and vivid colors.

It features (12) 1.9W high power UV LEDs, a 40-degree beam angle, special optics to prevent wear degradation from high UV exposure, flicker free operation for TV and FILM, an IP20 rated (indoor use only) aluminum extruded housing, an adjustable mounting bracket, and comes with a 22AWG power/data bare wire end pigtail cable attached on the back which connects to the Antari DarkFX Drive 4 fixture driver (sold separately) which is required for power and DMX control.

Features
High Efficiency UV LED Bar
40-Degree Beam Angle
365nm Peak Wavelength with Minimum Visible Light
9000+mW High Output at Full Intensity
Special Optics to Prevent Wear Degradation from High UV Exposure
Flicker Free Operation for TV and FILM

Specifications
SOURCE
(12) 1.9W High Power UV LEDs
20,000 Hour Average LED Life*
*LED Life may vary depending on several factors including but not limited to:
Environmental Conditions, Power/Voltage, Usage Patterns (On-Off Cycling), Control, and Dimming.

PHOTOMETRIC DATA
Optics: 40 Degrees
Peak Wavelength: 365nm
Radiant Flux Output: 9000+ mW

CONTROL / CONNECTIONS
DarkFX Drive 4 II Power/DMX Fixture Driver (sold separately)
Cable Connection: Bare Wire Power/Data Combo Cable

SIZE / WEIGHT
Dimensions (no mounting brackets)
Length: 47" (1194mm)
Width: 2" (51mm)
Vertical Height: 2" (51mm)
Dimensions (including mounting brackets)
Length: 47" (1194mm)
Width: 3" (76.2mm)
Vertical Height: 2.5" (64mm)
Dry Weight: 5lbs / 2.3kg

ELECTRICAL / THERMAL
DC 20-24V
Max Power Consumption: 24 Watts

APPROVALS / RATINGS
CE | IP20 Indoor Use Only