Airwave AT-HSD4 Pack 4 Channel Wireless System Package

Turnkey 4 Channel Wireless System Package with 4 Single Ear Wireless Headsets

This headset microphone  is the perfect 4 channel system for a facility or audio engineer that needs to have a wireless headset audio solution for their venue.  The entire wireless headset microphone system is housed in a durable 4 space flight case that securely protects each component of the system. Easy to transport, this setup with 4 headsets paired with body packs for each of the 4 channels is the perfect portable or stationary solution for wireless microphone needs. Also available in multiple configurations.

• 2 Airwave Technologies AT-4200 Dual Channel Wireless Systems
• 4 HSD-SLIMLINE+SE Single Ear Wireless Microphone Headsets
• 4 AT-4000 Series U42 Wireless Body Packs
• 4 AT-LAV2 Lavalier Microphones
• 4 Space Flight Rack
• 2 Space Locking Rack Drawer with Diced Foam
• 514-542 MHz
• FCC Tested and Approved: FCC ID  2AINTAT-4200

AT-4200 WIRELESS MICROPHONE RECEIVER SPECIFICATIONS

• Frequency Range: 470~489MHz / 514~542 MHZ
  Modulation : FM
  Working Range: 328’
  Optional Frequency: 192
  Frequency Response: 50Hz ~ 15KHz (±3dB)
  Dynamic Range: > 105dB
  THD: < 0.5%
  S/N Ratio: > 102dB(A)
  RF Sensitivity: < -95dBm
  Image Rejection: > 60dB
  Output Connectors: XLR×1/ 1/4-inch connector×1
  Audio Output Level: XLR: +10dBV / 1/4-inch connector: +8dBV
  Impedance: XLR: 3KΩ / 1/4-inch connector: 3KΩ
  Pilot Tone: 32.768KHz
  Display: LCD
  Power Requirements:  12V/0.5A DC
  Operating Temperature Range: 32°F - 122°F
  Dimensions: 6.299” (W) x 16.142” (L) x 1.732” (H)
  Weight: 3.858 lb.
  FCC ID: 2AINTAT-4200

AT-U42 BODYPACK TRANSMITTER SPECIFICATIONS

• Gain Adjustment Range: 0/3/6dB
  Input Impedance: 5KΩ
  Output Power: 2mW / 10mW / 30mW
  Harmonic Rejection: > 50dB
  Pilot Tone: 32.768KHz
  Display: LCD
  Power Requirements: 1.5V x 2(AA)
  Battery Life: >8H/1300mAH
  Dimensions: 6.5” x 2.56” x .91”
  Weight: 4.59oz

If using up to 2 units (up to 4 channels) the wireless headset microphone system does not require an antenna combiner under normal conditions.  If using 3 to 5 units (6 to 10 channels) the use of an approved antenna combiner is highly recommended. The official Antenna distribution partner of Airwave Technologies is RF Venue.   They are without question, the leaders of antenna distribution.