The ADJ Fog Fury Faze is a lower cost alternative to an oil-based Haze Machine, that actually uses water-based fog juice. It creates an even mist right out of the machine rather than a big burst of cloudy fog. This allows for a more even fog atmosphere in the air to highly beams of light from lighting effects. It features ADJ’s advances in Fog Machine technology such as: a special heating element design that uses an oil type transmission throughout the pipeline to prevent clogging, a high performance pump system for optimum output, plus ADJ’s Electronic Thermo Sensing (ETS) technology for heating optimization.
The Fog Fury Faze uses standard water-based fog liquid, has a warm-up time of 5 minutes, has a 2 liter external fog liquid tank, and has an output of 1,000 cubic feet per minute.
700W portable, high output Faze Machine
High performance pump for optimum output
ADJ’s Electronic Thermo Sensing (ETS) technology
Automatic circuit cut-off to protect pump if fog fluid tank runs dry
Special heating element design that uses an oil type transmission pipeline system to minimize the possibility clogging
LED heating indicator system in tank: Red = Heating; Green = Ready to use; Flashing = Fog fluid tank is low
Convenient carrying handle
Low Fluid Indicator on rear
Warm-up time: 5 min
External fog fluid tank: 2 Liter
Warm-Up Time: 5 Minutes
Fog Output: 1,000 (cu.ft/min)
Uses water-based fog fluid
Included Accessory: ADJ FF23TC - 25 ft wired timer remote
Power Connection: IEC AC In
Voltage: AC 120V, 230 or 240 50/60Hz
Power Consumption: 700W (Full on)
Dimensions (LxWxH): 15” x 10” x 8.5” / 376 x 250 x 212mm
Weight: 14 lbs. / 6.2 kg.
Fog Fury Faze User Manual - Download