Airwave AT-8-SYS1-PRO 8 Channel Wireless System Package

Turnkey 8 Channel Wireless System Package with 4 Handhelds, 4 Single Ear Wireless Headsets and 4 Lavaliers with Body Packs

This multi-channel wireless microphone package is an ideal 8 channel system for a facility or audio engineer that needs to provide the ultimate audio solution for their venue.  The entire multi-channel wireless microphone system is housed in a 10 space rolling flight case that securely protects each component of the system. Easy to transport, this setup with 3 different transmitter options for each of the 8 channels is the perfect portable or stationary solution for wireless microphones. The multi-channel wireless microphone system is also available in multiple configurations.

• 4 Airwave Technologies AT-4200 Dual Channel Wireless Systems
• 4 HSD-SLIMLINE+SE Single Ear Wireless Microphone Headsets
• 4 AT-4000 Series U41 Wireless Handheld Microphones
• 4 AT-LAV2 Lavalier Microphones
• 4 AT-4000 Series U42 Wireless Body Packs
• Furman M-8Lx Power Conditioner with Lights
• RF Venue Distro 4 Premium Antenna Distribution Hub
• Diversity Fin

2 Band-Pass Filter 470-560 Mhz

• 2 25ft Antenna Cables
• 4 Wireless Microphone Clips
• 10 Space Flight Rack with Casters
• 2 Two Space Rack Drawers with Diced Foam
• 514-542 MHz
• FCC Tested and Approved: FCC ID  2AINTAT-4200
• *Microphone stand for RF Venue DFIN not included

AT-4200 WIRELESS MICROPHONE RECEIVER SPECIFICATIONS

• Frequency Range: 470~489MHz / 514~542 MHZ
  Modulation : FM
  Working Range: 328’
  Optional Frequency: 192
  Frequency Response: 50Hz ~ 15KHz (±3dB)
  Dynamic Range: > 105dB
  THD: < 0.5%
  S/N Ratio: > 102dB(A)
  RF Sensitivity: < -95dBm
  Image Rejection: > 60dB
  Output Connectors: XLR×1/ 1/4-inch connector×1
  Audio Output Level: XLR: +10dBV / 1/4-inch connector: +8dBV
  Impedance: XLR: 3KΩ / 1/4-inch connector: 3KΩ
  Pilot Tone: 32.768KHz
  Display: LCD
  Power Requirements:  12V/0.5A DC
  Operating Temperature Range: 32°F - 122°F
  Dimensions: 6.299” (W) x 16.142” (L) x 1.732” (H)
  Weight: 3.858 lb.
  FCC ID: 2AINTAT-4200

AT-U41 HANDHELD MICROPHONE TRANSMITTER SPECIFICATIONS

• Capsule Sensitivity: -50dB ± 2dB V/PA@1KHz
  Capsule Frequency Response: 50Hz ~ 16KHz
  Gain Adjustment Range: 0/3/6dB
  Input Impedance: 5KΩ
  Output Power: 2mW / 10mW / 30mW
  Spurious: >dB
  Pilot Tone: 32.768KHz
  Display: LCD
  Power Requirements: 1.5V x 2(AA)
  Battery Life: >8H/1300mAH
  Dimensions: 9.84” x 1.97”
  Weight: 12.7oz

AT-U42 BODYPACK TRANSMITTER SPECIFICATIONS

• Gain Adjustment Range: 0/3/6dB
  Input Impedance: 5KΩ
  Output Power: 2mW / 10mW / 30mW
  Harmonic Rejection: > 50dB
  Pilot Tone: 32.768KHz
  Display: LCD
  Power Requirements: 1.5V x 2(AA)
  Battery Life: >8H/1300mAH
  Dimensions: 6.5” x 2.56” x .91”
  Weight: 4.59oz

If using up to 2 units (up to 4 channels) the multi-channel wireless microphone system does not require an antenna combiner under normal conditions.  If using 3 to 5 units (6 to 10 channels) the use of an approved antenna combiner is highly recommended. The official Antenna distribution partner of Airwave Technologies is RF Venue.   They are without question, the leaders of antenna distribution.