Look Solutions Viper Deluxe / Viper 2.6 Fog Machine w/ Fan / ATA Case

The VIPER deLuxe unites a powerful 2600 Watt fog generator and a fan with 400 Watt in a robust flightcase. A powerful fog output and simple handling are the advantages of the machine.
With a diverter the direction of the output can be changed. Due to this the fog can be fast dustributed within a room.

The VIPER deLuxe can be controlled via DMX 512. The connection is done with 5pin-XLR-plugs. The DMX start address can be adjusted and saved via the control panel. Due to the connected fan, the machine uses two following DMX-channels. The fan can also be adjusted via DMX. The machine can also be controlled with analog (0 - 10 V) via a lighting desk or via XLR-remote (option). This connection is done with 3pin-XLR-plugs.

A stand-alone-mode is also possible. The adjustments are done directly at the machine. A short press at the start button makes the machine run. Therefore a permanent pressing of the start button is unnecessary.
Internal timer. With the internal timer the fog time can be exactly adjusted in seconds, the wait time in minutes and the output in %.
Control panel

The control panel with LED-display, simple symbols allow for easy operation. It also protects the control buttons against dirt. Finest adjustments of the output. Digital technology makes fine adjustment of the pump possible. In steps of 1% the output can be adjusted from 0 - 99%. Thus, any desired effect from a tiny fog-cloud to the thickest fog can be produced. This enables the Viper deLuxe to be used in both small and large locations.

The case on wheels protect the machine and the fan, guarantees easy handling and make a flexible use possible. Four handles for easy transportation. The lids in the front and the back are fixed with butterflys and can be quickly unscrewed. Thus the control panel and the tank housing, which is fixed on the floor, can easily be reached.

Advantages
- Fog and air in one case
- DMX as standard, analog and Stand-alone-Mode
- Internal timer
- Simple handling
- Very powerful output
- Fog and air output adjustable in 99 steps of 1%
- Continuous output
- Fan adjustable separately, can be used as wind machine
- Made in Germany

Technical Data
Procedure
vaporizing fog generator
Power requirement - 2600 Watt
Voltage - 230 V / 50 Hz
Warm up time - approx. 7 min.
Fluid consumption
at max. output
at continuous output    
240 ml/min. - . 70 ml/min.
Fluid tank capacity - 5 Liter
Fog output - adjustable in 99 steps

Output Projection
max. 25 m
Fogging time
at max. outut
at < 50% output     
approx. 40 sec.
Continuous output
Air quantity of the internal fan     
adjustable in 99 steps

Control
DMX 512
0 – 10 V analog
Stand-alone-Mode
Radio remote (Option))
Temperature control - Microprocessor controlled
Overheating protection    
Heater block/thermostat
Pump/Thermal switch

Dimensions (L x W x H) - 75 x 42 x 77 cm
Weight with cas - e & fanapprox. 46,7 kg
   
Centrifugal Blower
Voltage - 230 V / 50 Hz
Air volume - 620 m³/h
Power requirement - 250 Watt
Current - 1.1 A
Capacitor (internal) - 8 µF / 400 VDB

(Oversized item - ships via truck only)