Look Solutions Cryo-Fogger CO2 Low Lying Fog Machine

1500W Low lying fog generator, a fan and a cooling chamber built into a compact flightcase (67 x 51 x 30 cm) with space next to the fog generator to held a 5ltr can of fluid. The CRYO-FOG is a powerful 2300 Watt low fog machine. The CRYO-FOG is a fog generator, a fan and a cooling chamber built into a compact flightcase (67 x 51 x 30 cm) with space next to the fog generator to held a 5ltr can of fluid. Liquid CO 2 is used to cool down the fog of the inbuilt low temperature fog generator. Therefore the machine produce thick low fog which distributes evenly. The machine is powerful enough to fill even big stages with low fog within a short time.

The liquid CO2 is delivered from a low pressure tank (20 - 24 Bar), which is connected to the machine via a hose. The intelligent technology ensures that the fogging process will not start before the cooling chamber has reached the right temperature. As a result, no "warm" fog - which will go upwards - can escape from the machine. The Cryo-Fog benefits from its compact size, the low weight, the powerful output, the low noise and the easy operation. The CRYO-FOG benefits from its compact size, the low weight, the powerful output, the low noise and the easy operation. The CRYO-FOG is a powerful 1500 / 2300 Watt low fog machine. The CRYO-FOG is a fog generator, a fan and a cooling chamber built into a compact flightcase (67 x 51 x 30 cm) with space next to the fog generator to held a 5ltr can of fluid. Liquid CO 2 is used to cool down the fog of the inbuilt low temperature fog generator. Therefore the machine produce thick low fog which distributes evenly.

The CRYO-FOG benefits from its compact size, the low weight, the powerful output, the low noise and the easy operation. The CRYO-FOG can be controlled via DMX 512. The connection is done with 5pin-XLR-plugs. The DMX start address can be adjusted and saved via the control panel. The machine uses three channels on the desk. So, the pump, the fan and also the CO 2-valve can be adjusted separately. If the CRYO-FOG is controlled vie DMX 512, the machine can also be used as a "normal" fog generator. The machine can also be controlled with analog (0 - 10 V) via a lighting desk or via XLR-remote (option). This connection is done with 3pin-XLR-plugs. The fogging process starts automatically as soon as the cooling chamber has reached the right temperature. A stand-alone-mode is also possible. The adjustment of the pump is done directly at the machine. The fan runs automatically. A short press at the start button makes the machine run and the fogging process start as soon as the cooling chamber has reached the right temperature. The control panel with LED-display, simple symbols allow for easy operation. It also protects the control buttons against dirt. Digital technology makes fine adjustment of the pump possible. In steps of 1% the output can be adjusted from 0 - 99%. Thus, any desired effect from a tiny fog-cloud to the thickest fog can be produced. This enables the CRYO-FOG to be used in both small and large locations.

Advantages
Fog generator, fan and cooling system in a compact case
DMX as standard, analogue (0 - 10V) and stand-alone-Mode
In the DMX-Mode the pump, the fan and the CO 2-valve can be adjusted separately
Can be used as a "normal" fog generator in DMX-Mode
Low fogging process starts automatically only if the cooling chamber has reached the right temperature
Easy handling
Powerful output
Fogging output adjustable in steps of 1% from 0 - 99%
Continuous output
Easy bottle changing with quick-out connectors
Made in Germany Procedure - vaporizing fog machine - with cooling chamber
Total requirement - Power requirement - 2300 Watt / 1700 Watt (120 V) - 2000 Watt / 1400 Watt (120 V)
Voltage - 230 V / 50 Hz - 120 V / 60 Hz
Warm up time - approx. 7 min.
Fluid consumption - at 100% output at. 50% output - 100 ml/min. - . 40 ml/min.
Liquid CO 2 consumption at max. output 2 kg/min.
Fluid tank capacity - 5 l
Fog output - adjustable in 99 steps
Fogging time - continuous output
Control - DMX 512, 0 - 10 V analog - Stand-alone-Mode
Temperature control Microprocessor
Overheating protection - Heater block/thermostat - Pump/Thermal switch
Dimensions (L x W x H) - 67 x 51 x 30 mm
Weight - approx. 28 kg

Cryo-Fogger-1500W - LP - Uses low-pressure dewar liquid CO2
Cryo-Fogger-1500W - HP - Uses high-pressure siphon tank liquid CO2
Cryo-Fogger-2300W - 230V - Requires 230 Volt Power - LP or HP

Specialized Shipping Item / Fixed Shipping