The SPECTRUM 25W IP54 takes raw coherent power combined with the latest in pure diode technology, and pushes this through precise optics, to form a beautiful high power laser projection system. Ideal for large indoor venues and stadiums, large outdoor shows, festivals, touring and permanent installations
This fixture has a guaranteed output of 25,000mw; combining KVANT’s pure diode red and blue modules, with a green COHERENT OPSL module. This combination produces a stunning white balance (RED: 7W/637nm + GREEN: 8W/532nm OPSL + BLUE: 11W/445+460nm). In addition, the pure diode modules used are protected by LASORB, for brighter more vibrant colors and longer lifetimes. It also comes standard with the Cambridge 6215 optical scanning system, for exceptionally fast scan speeds of 30K @ 8° optical, with an 80° maximum scan angle on both the X and Y axis, that produce stunning text, graphics and logos, as well as wide-angle beam effects.
This unit also has inbuilt Pangolin FB4-MAX, for comprehensive control of the system via a network connection (cat5/cat6), or using ArtNet and DMX.
The laser also includes a FREE hard plastic flight case, ILDA cable, E-Stop System, interlock, key-switch, and mechanical shutter. It is fully compliant with all US CDRH/FDA regulations, as well European and other international regulations.
The SPECTRUM 25W OPSL was developed to offer clients exceptional value in a laser projection system, while still featuring the professional quality standards you would expect from KVANT. These systems are entirely manufactured in Europe, using only the highest quality components and build processes. You can see how these lasers are made at KVANT’s factory, by Clicking Here.
The KVANT pure diode modules and OPSL modules used inside of the SPECTRUM 25W OPSL are custom fabricated and tested at the KVANT factory, and feature a great beam divergence (<1mrad), and beam diameter (5mm) while producing a nice white balance. And with full analog modulation, you can produce millions of different color combinations, as well as smooth cross fades and transitions. Because the laser diodes used inside of the KVANT modules are protected by LASORB, you also have the assurance of knowing your lasers will not be harmed from damage that can be caused by ESD or power surges.
This SPECTRUM 25W OPSL system also comes standard with the Cambridge 6215 optical scanning system, that produces beautiful text graphics, and logos, as well as wide-angle beam effects (30K @ 8° optical, with an 80° maximum scan angle on both the X and Y axis). With the SPECTRUM 25W OPSL, you know that you have a system capable of handling any type of content or show that you need to play.
These systems can easily be controlled via ILDA, SD card, or DMX or ArtNet. And, they also are DiscoScan 2.0 and Safety Scan Lens compatible, with optical upgrade systems that can be purchased, making these ideal for venues where you need a single laser to cover a wide projection area or for when you need to produce audience scanning effects safely.
External control on the back of the projector also make adjustments of colors, size, position, rotation and more, very easy to do.
In addition, these systems can have Pangolin’s PASS integrated, for audience scanning compliance in the United States. They also have in-built Pangolin’s FB4 hardware, for complete network control of your laser show.
All systems are also covered under KVANT’s Full Manufacturer’s Guarantee.
Output Power: 25W
Color Balance: R | G | B [mW]: 7000 | 8000 | 11000
Scan Speed: CT6215 | 30kpps @ 8°
Beam Diameter: 6×5.5 mm
Divergence: <1mrad [full angle]
Modulation: Analog, up to 50kHz
System Control: Pangolin FB4-MAX, Ethernet, ArtNet (DMX), ILDA, SD card
Power Requirements: 100-230V/50Hz
Power Consumption: max. 600VA
Automatic Colour Balance, Automatic Colour Calibration, Motorised Colour Alignment, Optical Bench with 4 grating effects controlled over ArtNet, Integrated WiFi for easy access to all control features from a tablet or iPad, IP54 design. This systems also features scanning system protection and daisy chain of emergency STOP signal for multiple system “one-hit” operation.
Accessories: Hard plastic flight case, power lead, 25M ILDA signal cable, E-STOP remote with 25M cable and RE-START button, E-STOP keys, interlock key, CD with PDF manual.
Compliance: Fully complies with the latest EN 60825-1, FDA regulations and TUV Laser Safety
PASS Certified: Can be configured with Pangolin’s PASS Technology, for audience scanning safety
Oversized Shipping Item / Fixed Shipping
Videos Hide Videos Show Videos
FB4 Network Laser Control with KVANT Laser Projectors
http://www.pangolin.com, http://www.GETALASER.com - This new n...
Multimedia Show - Vltava lives "The Storm", 2014
Audiovisual festival Vltava lives "The Storm" contained a stun...
Multimedia laser show - Böhmisch Budweis, 2015
The celebration of the 750th anniversary of Böhmisch Budweis (...
Kvant Laser Show - Prolight+Sound 2015, Frankfurt
This laser show was produced by KVANT crew for Prolight+Sound ...
How lasers are made
Have you ever wondered how we manufacture our lasers here at K...
The DiscoScan 2.0 - Wide Angle RGB Laser Projectors
http://www.pangolin.com - Check out the latest edition, to our...